 HomeNewsHow To Deal With The Phenomenon Of Viscose In Silicone Products

How To Deal With The Phenomenon Of Viscose In Silicone Products

2022-12-06

Silicone products have a lot of technical details at the front end of production, and there are many common detection problems at the back end. The surface glue of thermoformed products has caused headaches for many silicone product manufacturers, so we professional silicone product manufacturers. How to solve it?

For silicone products manufacturers, there are various problems. The reasons for various defects are the color matching of Silicone Electronics Products raw materials, molding technology and mold design. If the phenomenon of product sticking occurs, the main problem can be found in the mold.

Reasons, for example, after secondary vulcanization in the production of Silicone Baby Products, the mold core needs to be pulled out to completely remove the burrs and raw rubber from the product, because it is difficult to clean the rubber in the groove after taking out the product during secondary vulcanization ;Secondly, the weight of raw materials is not accurately controlled during production, causing too much raw rubber to flow into the small gaps inside the mold that are not overwhelmed, and the cleaning of the mold is not clean enough after the mold is released, resulting in raw rubber and rough edges sticking to the mold; the last important reason That is why many silicone product manufacturers reduce the vulcanization time to make the surface of the product soft when they need to catch up with the production of large-volume products. In addition, the structure of the mold causes the raw rubber to cling to the product.

How to deal with it:

1. In order to release the Silicone Accessories mold faster and make the product cleaner, the precision of the mold is well controlled.

2. In the production process of the product, in order to achieve the production effect, clean the inside of the product mold as much as possible and then carry out secondary vulcanization. While placing the raw materials, control the rubber within a certain weight range, and reduce it at a certain temperature and during the vulcanization process. Within a short period of time, avoid the product from softening.

3. You can use a dust-free cloth dipped in release water to wipe back and forth. For softer products, you can use a blade to scrape to see if it can be cleaned.

Silicone Sealing Ring

Previous: What Are The Classifications Of Silicone Kitchenware?

Next: About The Cleaning Method Of Silicone Products